The
Quick-Lift System™ consists of the Quick-Lift™,
the z-axis lift assist, coupled with either the Hinged
Arm for small work areas, or the Quick-Line, an overhead
x and y-axis motor-driven traverse that covers large work
areas. Quick-Lift(s)™ are used to handle a wide range
of products weighing up to 600lbs. Quick-Lift(s)™
handle heavy or frequently repeated lifts with ease. Operators
can work quickly and easily with precision, which contributes
to a better and more efficient working environment
PDF
Specification Docs
Quick-Lift Arm
Quick-Lift Arm 35 KG
Quick-Lift Arm 50-75 KG
Quick-Lift Arm 125 KG
Quick-Lift Arm 300 KG
Quick-Lift Arm Torque 125 KG
Quick-Lift Line
Quick-Lift Rail
Quick-Lift Rail Torque
History
The
Quick-Lift Line™ is made in Sweden by Kahlman Produkter,
AB and has been in production since 1988. We are proud
to state that in more than 12 years of use, no Quick-Lift™
lift motor or Quick-Line™ drive motor has ever failed
or been replaced - a testament to the reliability of the
system. Every lift is tested prior to delivery to customers
to ensure complete quality control and have been designed
to meet or exceed UL/CSA standards. The goal of the Quick-Lift™
System is a comprehensive and safe ergonomic solution
for each lifting application.
Quick-Lift™
The
Quick-Lift™ is the integral component of any Quick-lift™
System and is integrated with a unique maneuver handle.
The maneuver handle senses the amount of up or down-stroke
force applied by the operator, effectively sensing acceleration.
These forces are then reflected by the lifting action
of the Quick-Lift™ motor. Regardless of the weight
of the load, only 1/3 ounces of operating force are required
to lift the load. This allows the operator to feel a direct
and instinctive control of the lifting application. In
addition, the handle provides a neutral ergonomic grip
while freeing a hand that may be used to control the part.
When you release the grip on the operating handle, the
load is automatically balanced* allowing the operator
to use both hands to position the part. (*For 165lbs or
less)
The
Hinged Arm is designed to alleviate the ergonomic, positioning,
and safety problems created by manually driven rail systems
or traditional jib cranes. The Hinged Arm decreases the
force required by operators to move the mass overhead.
By mounting the Quick-Lift™ motor over the pillar,
using an aluminum double-hinged arm, and needle bearing
components, the operator is left with significantly less
overhead mass. The Hinged Arm allows flexible sideways
movement with a minimal risk of over-swinging and can
be mounted on a pillar, wall, or ceiling.
Quick-Line
The
Quick-Line is the "big brother" of the Quick-Lift™
System and is a unique motor-driven rail system that
can cover large areas. The Quick-Line is effective for
applications such as conveyor belts, multiple workstations,
or other large work areas. Positioning is controlled
by the patented sensor, which, controls the four drive
motors, two in each x and y-axis respectively. By sensing
the change in angle of the lifting wire to control position,
the operator has a free hand to control the part. In
addition, the operator has a neutral ergonomically sound
grip, which alleviates hand, wrist, and finger fatigue.
With
two drive motors in each axis, the Quick-Line is able
to react quickly to changes in any direction as well
as starting and stopping. The system matches the speed
and position of the operator without overshooting the
target. The Quick-Line has a span in the x-axis, of
between ~10' and ~40' feet, and an infinite length in
the y-axis. The system is mounted to high steel structure
or floor pillars.
Gripping
Devices
The
key to a good lifting solution is precision, speed,
and most of all, a comprehensive gripper. Quick-Lift™
gripping devices are custom designed by local distributors
for each application. With over 12 years and 1500 installations
worth of experience and design, each gripper is optimized
to how it can be handled, lifted, moved, twisted, or
turned. In addition, we involve our customers and operators
in our specialized design process to create the best
possible solution.
By
offering a complete turnkey lifting solution, we provide
unique and user-friendly devices that are easy-to-use,
built-to-last, and that will increase profitability.
After all, we are the experts when it comes to the lift,
but our customers are the experts when it comes to the
lifting application.
Culture
Safety
is at the foreground of each project a Quick-Lift™
is involved in from ergonomics to employee safety and
health. The Quick-Lift™ was designed with several
standard safety features. In the event of a power failure:
the Quick-Lift™ has a failsafe electromagnetic brake
to shield against accidentally dropping parts.
Programmable
stops: can be set to limit the action of the lift. Weight
overload: the lift will not allow an operator to exceed
the maximum lifting capacity. In addition, the lift
and grippers can be programmed to ensure safe handling
of the materials. It is our belief that solving lifting
problems is not a matter of simply selling a lift to
complete a sale. Instead, we believe in solving lifting
problems with an ergonomically safe lifting solution
from the lift to the gripper, a sound ergonomic solution
that will pay for itself in both a healthy workforce
and in increase productivity.
